DESCRIPTION:
This code sets when the MCM detects that there is a short to power on the circuits for the injector amplifier control valve on cylinders 1, 2 and/or 3.
MONITORED PARAMETER:
Injector amplifier control valve cylinder 1, 2, 3.
TYPICAL ENABLING CONDITIONS:
Fuel injector system nozzle opening pressure reading greater than 1.85.
MONITOR SEQUENCE:
None
EXECUTION FREQUENCY:
Continuous when enabling conditions met.
TYPICAL DURATION:
Two seconds
DASH LAMPS:
1. MIL
2. CEL
ENGINE REACTION:
Derate 25%
VERIFICATION:
Engine rpm 1400-1500: One minute.
PROBABLE CAUSES:
1. Short to power between pin 1 of the rear fuel injector harness 14-pin connector and pin 4 of the 120-pin ECM connection.
2. Short to power between pin 8 of the front fuel injector harness 14-pin connector and pin 8 of the 120-pin ECM connection.
3. Short to power between pin 12 of the front fuel injector harness 14-pin connector and pin 6 of the 120-pin ECM connection.
We’ll never share your email address with a third-party
Reviews
There are no reviews yet.