Detroit DD16 GHG14 (2014-16) Fault Code: SPN 3058 FMI 10 (MCM) Exhaust Gas Recirculation Valve Actuator Slow Response

Description

DESCRIPTION:
This code sets when the actual EGR flow vs. desired EGR flow is greater than a calibrated threshold during acceleration.

MONITORED PARAMETER:
1. EGR delta P sensor.
2. Intake manifold pressure sensor.
3. Intake manifold temperature sensor.

TYPICAL ENABLING CONDITIONS:
Low engine to high engine load.

MONITOR SEQUENCE:
1. One second after acceleration load.
2. Actual EGR flow vs. desired EGR flow is greater than a calibrated threshold.

EXECUTION FREQUENCY:
Always enabled

TYPICAL DURATION:
Five seconds

DASH LAMPS:
1. MIL
2. CEL

ENGINE REACTION:
None

VERIFICATION:
1. Road test with a trailer while performing multiple accelerations.
2. Engine load needs to increase above 50% during accelerations and the engine rpm is between 600 and 900 rpm.

PROBABLE CAUSES:
1. If any voltage codes exist, fix those first.
2. EGR valve actuator pull rod.
3. EGR actuator.
4. EGR valve.
5. Wiring between the EGR actuator harness and the ECM.